Infonet ConsultoresDeCA
Home › Blog › Common Mistakes When Filling In the Control Document (Spain)
Blog

Common Mistakes When Filling In the Control Document (Spain)

The most common mistakes in the electronic control document, from a missing trailer plate to a scanned PDF, and how to avoid them before the lorry leaves.

DeCA team · Infonet Consultores5 min read

Tablet, printed papers, a pencil and a cup of coffee on a white wooden office desk

Most problems with the control document don't come from not knowing that it exists, but from small slips when producing it: a missing piece of data, a PDF that isn't the one the regulation requires, or a correction made the wrong way. These mistakes are repeated in companies of every size and, at a roadside check, they can turn a completed document into one that is worthless. Here are the most frequent ones, grouped by type, with ways to avoid them.

Data errors

1. Not distinguishing the contractual shipper from the actual carrier

Writing "customer" and "carrier", or "sender" and "agency", without saying who is who. The Resolution of 5 June 2026 (issued by Spain's Ministry of Transport) requires both parties to be identified "expressly and separately". Use those exact words as labels.

2. Naming the subcontracting party as the carrier

If an agency or a haulier passes the job on to a self-employed driver, the actual carrier is the self-employed driver, who holds the authorisation under which the transport is carried out. And whoever hires them is the contractual shipper for that consignment.

3. Forgetting the shipper's tax ID or address

Article 6 of Orden FOM/2861/2012 (the Spanish ministerial order regulating the contract for road freight transport) requires the name, NIF (tax ID) and address of the contractual shipper, and the name and NIF of the actual carrier. The shipper's address is often forgotten because only the logo appears on the delivery note.

4. A blank trailer plate

For an articulated vehicle, you must enter the registration number of both the tractor unit and the trailer or semi-trailer. The tractor unit is known in advance; the semi-trailer, sometimes, only at the last minute. If the document is generated before it is known, it ends up incomplete.

5. An empty or invented weight

If the exact weight cannot be known at loading, the order allows another measure to be used. The Ministry accepts stating the activity ("supply of aggregates") with the volume, the number of units or another reasonable measure, or the vehicle's MAM (maximum authorised mass) if it is practically full. What makes no sense is leaving the field empty or putting in a random figure.

6. Confusing the transport date with other dates

The date of the document is the date the transport is carried out, not the date of the order or of the invoice.

File errors

7. Scanning or photographing the delivery note

The resolution requires the PDF to be natively digital, generated from the data in a software program. A scan or a photo of the paper delivery note is not valid, even if it is sent by WhatsApp and even if a QR code has been stuck on top.

8. A QR code that doesn't lead to the PDF

The QR code must contain the unique URL of the document, and that URL must download the PDF directly. It is not acceptable for it to lead to a page with a "download" button, a login screen or the company's general website.

9. A URL that expires too soon

Some links with a token expire within hours. The resolution allows security measures, but the link cannot expire before the service has ended, and downloading can only be disabled once seven calendar days have passed since the end of the service.

10. A heavy PDF

The limit is 5 MB. A delivery note with high-resolution images or several pages of scanned terms and conditions can exceed it.

Timing errors

11. Generating it after departure

The document must be created before the service actually starts, and the date and time of creation are recorded in the PDF's metadata. A document generated in the afternoon, when the delivery notes are being entered on the computer, shows that it was done late.

12. Not giving it to the driver

Generating it in the office is not enough. Before departure, the driver must carry a copy on their phone or on paper, with the QR code. A link they never opened is not a copy.

Errors when correcting

13. Crossing out and writing by hand

The resolution states that handwritten annotations on the printed copy are not taken into account. If a piece of data changes, you must either modify the PDF, stating the reason for the change and marking the old data as invalid, or generate a new one while keeping the original.

14. Correcting without telling the driver

With both correction methods, the modified or new PDF must reach the driver. If the office corrects it and the driver carries on with the old version, at a check they will show a document that is no longer valid.

15. Deleting the previous version

If a new PDF is generated, the original is kept so that there is a trace of the change.

Organisational errors

16. Grouping consignments that cannot be grouped

Several consignments can only fit into one document if the contractual shipper and the actual carrier are the same for all of them. Two shippers on the same lorry means two documents.

17. Issuing a document where it isn't needed and not issuing one where it is

Complementary private transport does not require it, whereas a trip with a hired self-employed driver does. The obligation applies per consignment. A plant with its own lorries and self-employed drivers needs to know which is which every day.

18. Not keeping the documents for a year

The shipper and the carrier must keep them for at least one year. If one of them generates it, the other must be able to download it during that time.

19. Using the CMR format and thinking that is enough

For domestic transport the CMR format may be used, but it must include all the data required by the order and comply with the resolution. A paper CMR is not an electronic control document.

Final checklist before the lorry sets off

  • Contractual shipper and actual carrier labelled, with tax IDs, and the shipper's address.
  • Origin, destination, goods and weight (or alternative measure) for each consignment.
  • Transport date and registration numbers of the tractor unit and the trailer.
  • PDF generated by software, with a QR code and created before departure.
  • Copy in the driver's hands.

How DeCA solves it

DeCA validates every piece of data in Article 6 before generating the document and labels the shipper and the carrier separately. The PDF is generated digitally, weighs around 12 KB, carries the date and time of creation and modification, and has a unique https URL that downloads it without credentials. Corrections generate a new version with the reason stated, the previous one remains downloadable and marked as superseded, and the driver receives it via WhatsApp.

If you want to see each requirement of the resolution and how it is met, it is on the DeCA page. If you already have a program that produces delivery notes as PDFs, in DeCA integrated with your program you can see how to upload them so that DeCA adds the QR code.

More articles from the blog

See all
Contact

Leave us your details.
We'll call you.

Tell us how many consignments you send a month and we'll tell you what works out best for you, even if it isn't DeCA.

  • We'll call you todayUsually within a few hours.
  • Nothing to installIt works in the browser on your phone and computer.
  • Prefer to call us?+34 959 54 07 12